The Aimpoint H30L is one of the four sights belonging to the new Hunter series of sights.
The Hunter series of sights
Just one look tells you that these are the most advanced hunting sights that Aimpoint has ever built. The design is clean, modern and stylish. From the top mounted digital push button adjustment pad, to the rugged tube walls and massive objective lens, these sights are built to hunt in all weather and light conditions, and will get you on target fast without magnification. Aimpoint's exclusive ACET diode technology lets you turn this sight on, and leave it on for up to 5 years on a single battery! The competition can't even come close. Let's go hunting!
Speed and accuracy
Using the Hunter H30L, you will be able to make the tough shots, and forget about bad light or moving targets. The Aimpoint sight was born steeped in European hunting tradition. The difficulty of hitting moose, Russian boar, and red stag moving through thick forests in rain and snow made the illuminated red dot sight a necessity. Dump your scope and give yourself the advantages of speed and accuracy on your next hunt. Easily mounted on your favourite firearm. This sight is ideal for use on rifles with standard or magnum actions, and it suits any hunter who desires the classic lines of a full length sight. Hunter H30L features a 30mm tube diameter, which allows it to be mounted on your favourite firearm using your standard scope rings.
Unique features of the Aimpoint H30L
Ideal for use on rifles with standard or magnum actions.
Two 30mm Weaver-style sight rings supplied with each sight.
Multi-coated 35mm objective lens.
50 000 hours of constant operation from a single CR-2032 battery.
2 MOA dot.
12 position digital push button inten-sity adjustment.
Adjustment turret caps are the only tools required to zero the sight.
Incredibly fast and accurate.
Legendary Aimpoint toughness.
Standard features for all Aimpoint sights
Unlimited field of view
Parallax-free and unlimited eye relief
Unaffected by extreme weather conditions
Rugged, durable construction
No hazardous materials
No laser emission that could be harmful to your eyes
Increased aiming confidence
Article number 12691
Technology ACET (Advanced Circuit Efficiency Technology)
Working principle Reflex collimator sight - red dot sight
Lightsource LED (Light Emitting Diode) totally eye-safe
Lightsource wavelength 650 nm red light
Red dot size in MOA (minute of angle)* 2
Parallax Absence of parallax -
No centering required
Eye relief Unlimited
Night vision compatibility No
Anti-reflex coating all surfaces & multi-layer coating objective lens Yes
Magnification No magnification (1X)
Battery One 3V Lithium battery, type CR2032
Battery life in hours ** 50 000 (over 5 years of continuous use)
Dot intensity adjustment Digital push button
Daylight (DL) settings 1 Off & 12 DL
Material housing High strength aluminum
Surface finish Anodized, semi-matte
Color housing Black
Adjustment 1 click 20mm at 100m, (1/2" at 80yds)
Mounting methods 2 Rings, + 30mm, (+ 1.18")
Temperature range -30degrees - +60 degrees C, (-20 degrees - +140 degrees F)
Water resistance - submersible to Fully waterproof
Radioactive components used None
Length 229mm, (9.0")
Maximum distance between rings 150mm, (5.9")
Minimum distance between rings 45mm, (1.77")
Ojbective diameter 43mm, (1.7")
Tube diameter 30mm, (1.18")
Weight sight only 235g, (8.3oz)
* 1 MOA + 30 mm at 100 meters + 1" at 100 yards.
** at room temperature & at start-up setting (7).
Specifications are subject to change without notice.
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov