The MBUS (Magpul Back-Up Sight) Pro is a all-steel corrosion-resistant back-up sighting solution that delivers maximum strength and functionality with minimum bulk at a price that's even smaller than its size.
The dual aperture, windage adjustable rear and no-tool, elevation adjustable front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Positive detents keep the MBUS Pro Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width front sight is compatible with most IR aiming laser and light installations for the professional user.
Made in the USA.
ALL STEEL CONSTRUCTION
Case hardened and finished with Melonite QPQ for extreme resistance to wear and corrosion.
.432 HEIGHT ABOVE RAIL AT TALLEST POINT AND COVERS LESS THAN 1-5/8" OF RAIL WHEN STOWED
STANDARD AR SIGHT HEIGHT WHEN DEPLOYED
Positive detents in both the up and down positions as well as on the elevation knob.
ELEVATION ADJUSTMENT KNOB
Elevation adjustment knob – no tools required.
Steel, rectangular sight post selectable between Match and Standard widths:
.04” Match width for increased precision.
.06” Standard width for maximum visibility.
Technical Specifications
Position: Front
Height above rail, stowed: ~0.43 in. max
Length, stowed: 1.6 in.
Weight: 1.5 oz.
Other Specs
Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks.
Elevation Adjustment
~1 MOA (1.131"/100m) per click with a 14.5" sight radius.
~0.7 MOA (0.820"/100m) per click with a 20" sight radius.
*NOTE: All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights.