Whelen Engineering Full Function Hands-Free 295SL Series Siren

Economically priced. Full function siren plus radio repeat and public address. Operates up to two 100 watt speakers. Includes Hands- Free operation and Scan-Lock siren tones. Self-contained unit for under-dash mounting. Hard-wired microphone. Backward compatible to the original 295HF100 and WS2100 Series connector microphone with a volume control knob. Two year warranty.

Features:

• 17 Scan-LockTM Siren Tones to choose from (Pat. # RE38,795).
• The 295SL allows for user selectable siren tones via momentary recessed switch located on the rear of the unit.
• Choose the placement of each siren tone on rotary knob for complete user customization.
• Economical six function siren plus radio repeat and public address.
• Meets California & SAE specifications, SAE J1849 & California Title 13.Model 295SL100
• Operates up to two 100-watt speakers."Hands-Free" operation.
• Turn On/Off and access all three siren tones (default Wail, Yelp and Piercer) without taking hands from steering wheel
• Two manual functions allow for additional siren tone choices when you need it the most.
• PTT (push to talk) switch on microphone overrides all siren functions.
• Combination On/Off and horn ring transfer switch.
• Pre-wired unidirectional microphone.
• Optional plug-in microphone with volume control knob.
• Adjustable preset microphone volume.
• Adjustable preset radio repeat volume.
• Input polarity protection.
• Output short circuit protection.
• External spade-type fuse.
• Bi-polarity horn/ring control activation.
• "Aux Enable" activates siren tones via input (slide switch, power controls or relay-to-ground connection).
• Quick disconnect plug for ease of service or replacement.
• Adjustable bail bracket allows the mounting of the siren in a variety of positions.
• Complements all Whelen's under dash products.
• Backward compatible to the original 295HF100 and WS2100 Series connector.
• Optional 24 volt DC model available, contact factory.
  
  Specifications:
  
  
• Input Voltage: 10-16
• VDC Polarity: Negative ground
• Polarity Protection: Diode / Fuse
• Output Power: (2) 100 Watt Speakers
• Output Load: Two 11 OHM Speakers
• Input Current: 0 MA (OFF)
• Standby Current: 100 MA (max) (backlight off)
• Backlight Current: 150 MA (max)
• Operating Current: 16 AMPS (max)
• Fuse: 20 AMP auto fuse
• Fuse Mounting: Rear Panel
• Output Short Protection: Fuse
• Audio Frequency Range: 300Hz - 10000Hz +/-3dB
• Distortion: 5% @ 1KHz @ 25 Watts
• Radio Input Impedance: 1500 OHMS
• Horn/Ring Control: +/- 12 VDC or ground
• Operating Temperature: -30 / +80 Degree C
• Operating Humidity: 99% non condensing
• Connector: 12 pin AMP Mate-N-Lok, 24 pigtail wires

Reviews / Q&A