Unique features of the CompM4:Low battery compartment
Compatible with every generation of NVD
ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
Internal voltage regulator allows the CompM4 to be used with any AA size battery
7 NVD settings and 9 daylight settings
QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation and lower the risk of snagging on other gear
Mount base is keyed into to the body of the sight to absorb recoil
Mount base screws directly into the sight no separate sight ring required.
500,000 hours of use on NVD setting
2 MOA dotfor close combat and long distance engagement
Matches perfectly with Aimpoint 3XMag
Unequaled light transmission
Front lens opening is threaded for addition of kill Flash anti-reflective device
Submersible to 150 feet (45meters)
Vertical spacer included
Type classified as the U.S. Army's new M68CCO
Improved adjustment caps are easier to remove and protected against impact
Can be used with a carry handle adapter for use on all M16 rifles
Mechanical switch for speed and reliabilityStandard features for all Aimpoint sights:Unlimited field of view
Parallax-free and unlimited eye relief
Unaffected by extreme weather conditions
Rugged, durable construction
No hazardous materials
No laser emission that could be harmful to your eyes
Increased aiming confidenceFeatures:- Working principle: Reflex collimator sight - red dot sight
- Lightsource: LED (Light Emitting Diode) totally eye-safe
- Lightsource wavelength: 650 nm red light
- Red dot size in MOA (minute of angle): 2
- Parallax: Absence of parallax - No centering required
- Eye relief: Unlimited
- Night vision compatibility: Yes
- Anti-reflex coating all surfaces & multi-layer coating objective lens: Yes
- Magnification: No magnification (1X)
- Battery: One AA battery, accepts 1.5-5V - high battery compartment
- Battery life in hours: 80,000 (over 8 years of continuous use)
- Battery life in hours at NVD settings: 500,000
- Dot intensity adjustment: Manual rotary switch - high switch location
- Daylight (DL) settings: 9 DL of which one extra bright
- NVD settings: 7 NVD
- Material housing: Extruded high strength aluminum
- Surface finish: Hard anodized, matte
- Color housing: Black
- Adjustment 1 click: 16mm at 100m, (1/2 at 80yds)
- Mounting methods: Integrated QRP2 - (Quick release)
- Temperature range: -45 degrees - +71 degrees C, (50 degrees- +160 degrees F)
- Water resistance: submersible to 45m, (150ft)
- Radioactive components used: None
- Length: 120mm, (4.7")
- Width/height sight only: 53 x 60mm, (2.1" x 2.4")
- Maximum ring width: 50mm, (1.97)
- Weight sight only: 265g, (9.3oz)
Aimpoint CompM4S QRP2 mount, rubber cover, ARD
PayPal is not available as a payment option for this product.
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
